Honeywell rapid eye System Administrator Manual page 13

Figures
Fig. 1-1.
Fig. 1-2.
Fig. 1-3.
Fig. 2-1.
Fig. 3-1.
Fig. 3-2.
Fig. 3-3.
Fig. 3-4.
Fig. 3-5.
Fig. 3-6.
Fig. 3-7.
Fig. 3-8.
Fig. 3-9.
Fig. 3-10. Report of a Dynamic IP Assigned by DHCP to a Rapid Eye Unit.
Fig. 3-11. DNS Setup in Microsoft Windows.
Fig. 3-12. Connection Settings for NAT Use of an Internet Router.
Fig. 3-13. Unit IP for Network Connection Using NAT.
Fig. 3-14. Using a Direct Connection to Operate a Multi-Media Unit.
Fig. 3-15. Adding a Dial-up Connection.
Fig. 3-16. Dial-up Connection.
Fig. 3-17. Irregular Use of Area Codes.
Fig. 3-18. Listing of Connections (Two) to a Site.
Fig. 3-19. Connecting to a Rapid Eye Site through a RAS Server, Transparently.
Fig. 3-20. RAS Server's Telephone Number and PPP Information.
Fig. 3-21. Connecting to a RAS Server, Before Running View to Operate Units.
Fig. 3-22. Site Tab's Report of Primary Connections.
Fig. 3-23. For Local Call s that Need an Area Code, Customize Dial-up.
Fig. 3-24. Customizing an Alarm Station's Telephone Number.
Fig. 4-1.
Fig. 4-2.
Fig. 4-3.
Fig. 4-4.
Fig. 4-5.
Fig. 5-1.
Fig. 5-2.
Fig. 5-3.
Fig. 5-4.
Fig. 5-5.
Document 800-02325 Rev A
07/08
To Install View Software, Run the Multi-Media View CD-ROM.
To Install Admin Software, Run the Multi-Media Admin CD-ROM.
Desktop Icon for Admin software.
Right-clicking in the Right Pane.
Naming a Site.
LocalView's Site Name.
Report of a Dynamic IP Assigned by DHCP to a Rapid Eye Unit.
Adding a Dial-up Connection to a Site Record.
LocalView Panel for Network Settings.
Setting-up a Common Network Connection.
Operating a Rapid Eye Unit Using a Network Connection.
LocalView Network Settings: DHCP.
Inputting the Site Name from LocalView into a DHCP Connection.
Multi-Media Unit Serial Number and Version of Unit Software.
Unit Time Using SNTP as a Reference.
Different Rules May Apply for Daylight Savings Time in one Time Zone.
Setting a Multi-Media Unit's Clock Manually.
The System Tab: Upgrading Remote View Software
The Video Tab: Camera Names and Image Settings.
The Video Tab: Color, Recording Settings, Motion and PTZ.
The Recording Tab, Showing that Three Cameras Are Recording.
A Red Dot Is Added to the Icon of a Camera that Is Recording.
The Menu for Duplicating Recording Settings (1) or for Restoring Defaults (2).
System Administrator Guide
20
21
21
23
23
24
25
29
30
31
31
32
33
34
35
36
37
38
38
39
39
42
43
43
45
46
48
49
53
54
55
57
60
65
67
68
69
70
13