Maintenance Tasks; Table 4-3 When To Accomplish Maintenance Tasks - Honeywell rapid eye System Administrator Manual

Unit Configuration: Basics

Maintenance Tasks

The tasks in table
column.
Table 4–3 When to Accomplish Maintenance Tasks
Crucial ...
to all units
for video
for motion
to restrict
access
LAN/WAN
for PTZ
Multi audio
alarms
n/a
Honeywell
technicians
n/a
upgrades
n/a
62
4–3 are carried out as you see fit. Suggestions are indicated in the Accomplish
Tab and Task Accomplish ...
Time after creating sites or if time on a
Multi-Media unit is grossly wrong
Video - Picture after creating sites and when
adding/removing camera(s) at a site
Video - Motion at user discretion; to prepare video for
motion search and alarms.
Security after changing the system password,
modifying user profiles or adding
alarm stations
System after creating sites or when enabling
FAULT RELAY at a site
Serial Devices To select a driver for cameras that
and pan, tilt and zoom (PTZ) and to enable
Video - PTZ PTZ-type camera(s) at a site
Audio at user discretion
Events at user discretion; to setup logs or
alarms
Serial Devices - Data at user discretion; to setup logs or
recording alarms triggered by events
Statistics at user discretion; for troubleshooting
Clearing data when permanently closing a site
System files when upgrading a Multi-Media unit
Eagle Audio Enable Eagle hardware.
See... (page)
54
65
116
60
136
85
149
193
145
128
131
134
151