Customizing A Tour; To Change The Order Of Sites In A Tour - Honeywell rapid eye System Administrator Manual

Fig. 12–2. The Default Amount of Time for a Tour of each Unit.

Customizing a Tour

Purpose
For each tour, you have the option of specifying:
The order in which sites are toured
The time spent at each site
- and -
The connection to be used to reach the site. By default, the first connection in the site's
definition is used.

To Change the Order of Sites in a Tour

1. Using Admin, click the Tours tab. There is no need to click it if already displayed.
2. To display the Update Tour dialog box, do one of the following:
Double-click the name of the tour that you want to customize.
- or -
Select the tour that you want to customize; then: either click
Actions menu, or press the F12 key.
3. In the Update Tour dialog box, drag and drop a site name to a new position in the list.
4. You can click Save and Close or change the time spent at the sites, as explained next.
Document 800-02325 Rev A
07/08
System Administrator Guide
on the toolbar, Update on the
229