Adjusting A Video Feed; To Re-Enable One Camera's Feed; To Re-Enable All Newly Connected, Powered Cameras; To Adjust All Cameras At Once - Honeywell rapid eye System Administrator Manual

Video Feed Setup

Adjusting a Video Feed

1. Continue or start a
2. On the Video tab, select the name of a camera in the Name column.
3. Adjust Brightness, Hue, Contrast and Saturation, as needed. You can monitor changes on the
video feed displayed on the tab: your changes are saved on-the-fly.
Video feed adjustments cannot correct cameras that are badly-angled, out of focus, in the
dark, and so on. If corrections are needed beyond adjustment, see
Interference for Video

To Re-enable One Camera's Feed

In the Name column, click the box next to the camera icon, next to the camera name. The
camera is enabled when a checkmark appears in the box. If no video appears, consider that
the camera may be turned off, disconnected from the unit, not powered or damaged. See also
Environmental Interference for Video

To Re-enable All Newly Connected, Powered Cameras

You have the option of either:
Enabling the new cameras one-by-one.
Cycle the unit's power, so that cameras are auto-detected.

To Adjust All Cameras at Once

Press and hold a Ctrl key on the PC's keyboard, while changing a setting with the mouse.

To Disable a Camera

1. Continue or start a
2. On the Video tab, select a camera in the Name column.
3. Clear the box next to the camera's name.
Disabling a camera resets the recording settings and other configurations to default
settings. The defaults are used when the camera is re-enabled.

Resolution of Live Video in View Software

Automatic optimization of resolution for Live video sessions
View software optimizes the resolution of live video. The size of a camera window determines
which resolution is used. As an operator makes a camera window larger (or smaller), the
resolution of images is automatically adjusted for an optimal view of the video feed. See the
Remote View Operator Guide, for more procedures and tips about live video.
66
Maintenance Session.
Feeds, on p. 83.
Feeds.
Maintenance Session.
Environmental