Setting The Video Quality On One Camera; Setting The Multi-Media Time Reference; Figure 2-5 Resolution And Quality Can Be Adjusted During A Live Session; Figure 2-6 Globally Customizing The Time Reference - Honeywell Rapid Eye Operator's Manual

Setting the Video Quality on One Camera

Setting the Multi-Media Time Reference

Document 800-02951V3 Rev A
11/09
Video quality can be lowered on low-speed dial-up connections to improve the
transmission time of images (while monitoring live sessions). It can also be heightened on
one camera for more detail, as needed.
1. Do one of the following:
• Right-click in a camera window. A menu appears showing Video Quality (see
Figure 2-5).
• Select Options
2. Place the mouse pointer on the Video Quality command, and select another Video
Quality value, as needed.
Figure 2-5 Resolution and Quality Can Be Adjusted During a Live Session
All cameras can be set at once by pressing and holding the
while changing a Video Quality setting.
You have the option of displaying time as Universal Coordinated Time (UTC), or showing
the Multi-Media unit's time zone (RTZ), or the View Operator PC's own local time (LTZ).
1. Using View, on the main View menu, select Options, then click Time Reference. The
Show Time Reference As dialog is displayed (see
2. Set the time display reference to either your local time zone (LTZ), the Rapid Eye
unit's time zone (RTZ), or to Universal Coordinated Time (UTC).
3. Click OK.
Figure 2-6 Globally Customizing the Time Reference
Rapid Eye Remote View Operator Guide
Video Quality in the View menu of the Live session.
CTRL
key on the PC keyboard
Figure 2-6).
33