Impact On View; Creating A Multi Db - Honeywell rapid eye System Administrator Manual

Impact on View

View can be set to a different Multi db while Admin is running, and vice versa.
When switching to another Multi db for use with View, a fresh local Multi db overwrites the local
db used at the previous log on.
Typing the name of a non-existent database in the View logon window is of little consequence.
Acknowledge the error message and type the name again.

Creating a Multi Db

Tip
Creating a Multi db is a rare occurrence. Only one Multi db is needed for all of the Rapid
Eye sites in your system. Honeywell recommends using the default REMCentral.mdb if you
plan to use only one Multi database. The installers of your system may have already
created a Multi db to test the installation.
Using the Admin - Logon window to create a database
If the installers did not supply you with their Multi db, you can use Admin to create an empty
Multi db instead of logging on.
Fig. 14–4. The Admin Logon Window.
Document 800-02325 Rev A
07/08
System Administrator Guide
241