Ricoh D065 Service Manual page 690

005 DLT SEF
006 LG SEF
007 LT SEF
008 12" x 18"
009 Other
6115 Pre-stack Number
001 A4 LEF
002 LT LEF
003 B5 LEF
004 10.5"x7.25"
005 A4 SEF
006 LT SEF
007 B5 SEF
008 10.5"x7.25"
009 Other
6118 Jogger Off/On (B706)
001 A3 SEF
002 B4 SEF
003 A4 SEF
004 A4 LEF
005 LT LEF
006 B5 LEF
SM Appendix
nip of the folding roller.
The folding rollers rotate ccw to crease the booklet,
reverse cw, then rotate ccw again to crease the booklet
fold twice before feeding to the folding unit exit rollers.
[1 to 6/0/1]
0:2, 1:5, 2:10, 3:15, 4:20, 5:25, 6:30 (passes)
This SP sets the number of sheets sent to the pre-stack tray.
With this SP set to the default (3):
3 sheets are sent to the pre-stack tray.
When the 4th sheet feeds, the 4th sheet and 3 sheets from
the pre-stack tray are sent to the stapling tray together.
Note: You may need to adjust this setting or switch it off
when feeding thick or slick paper.
[0 to 4/3/1]
0: None
1: 1 sheet
2: 2 sheets
3: 3 sheets
4: 4 sheets
This SP switches the jogging operation of the output jogger
unit attached to the side of the finisher off and on.
[0 to 1/0/1] 0: Off, 1: On
Note: After installation of the Output Jogger Unit B703, this
SP must be set to "1" for the jogging motor to operate the
jogging fences.
4-157
Service Program Mode Tables
D062/D063/D065/D066