Ricoh D065 Service Manual page 1055

Error Codes
Code Meaning
15-80 Mail Job Task Read Error
Repeated Destination
15-81
Registration Error
15-91 Send Registration Error
15-92 Memory Overflow
15-93 Memory Access Error
15-94 Incorrect ID Code
15-95 Transfer Station Function
Original length exceeded
22-00 the maximum scan
length
D418
Could not receive the transmission because the
destination buffer is full and the destination could
not be created (this error may occur when
receiving a transfer request or a request for
notification of reception).
Could not repeat receive the transmission because
the destination buffer is full and the destination
could not be created (this error may occur when
receiving a transfer request or a request for
notification of reception).
Could not receive the file for transfer to the final
destination:
The format of the final destination or the
transfer destination is incorrect.
Destinations are full so the final and transfer
destinations could not be created.
Transmission could not be received because
memory overflowed during the transaction.
Transaction could not complete due to a
malfunction of SAF memory.
The machine rejected an incoming e-mail for
transfer request, because the ID code in the
incoming e-mail did not match the ID code
registered in the machine.
The machine rejected an incoming e-mail for
transfer because the transfer function was
unavailable.
Divide the original into more than one page.
Check the resolution used for scanning. Lower
the scan resolution if possible.
42 SM