4.5 BIT SWITCHES - 3
Do not adjust a bit switch or use a setting that is described as "Not used", as this
may cause the machine to malfunction or to operate in a manner that is not
accepted by local regulations. Such bits are for use only in other areas, such as
Japan.
Default settings for bit switches are not listed in this manual. Refer to the System
Parameter List printed by the machine.
4.5.1 COMMUNICATION SWITCHES
Communication Switch 00 (SP No. 1-104-001)
No
Compression modes available in receive
mode
Bit 1
Bit 0
0
0
0-1
0
1
1
0
1
1
Compression modes available in transmit
mode
Bit 3
Bit 2
0
0
2-3
0
1
1
0
1
1
4
Not used
SM
Function
Modes
MH only
MH/MR
MH/MR/MMR
MH/MR/MMR/JBIG
Modes
MH only
MH/MR
MH/MR/MMR
MH/MR/MMR/JBIG
99
Bit Switches - 3
Comments
These bits determine the
compression capabilities to be
declared in phase B (handshaking)
of the T.30 protocol.
These bits determine the
compression capabilities to be used
in the transmission and to be
declared in phase B (handshaking)
of the T.30 protocol.
Do not change the settings.
D418