Ricoh D065 Service Manual page 1090

No Function
scan direction
System Switch 13 - Not used (do not change these settings)
System Switch 14 - Not used (do not change these settings)
No Function
0 Not used
Going into the Energy Saver
mode automatically
1
0: Enabled
1: Disabled
2-3 Not used
Interval for preventing the
machine from entering Energy
4-5
Saver mode if there is a pending
transmission file.
Bit 5 Bit 4 Setting
0 0 1 min
SM
System Switch 12 (SP No. 1-101-019)
Input even numbers only.
This setting determines the print start position
for the TTI from the left edge of the paper. If the
TTI is moved too far to the right, it may
overwrite the file number which is on the top
right of the page. On an A4 page, if the TTI is
moved over by more than 50 mm, it may
overwrite the page number.
System Switch 15 (SP No. 1-101-022)
Do not change the settings.
1: The machine will restart from the Energy
Saver mode quickly, because the +5V power
supply is active even in the Energy Saver
mode.
Do not change these settings.
If there is a file waiting for transmission, the
machine does not go to Energy Saver mode
during the selected period.
After transmitting the file, if there is no file
waiting for transmission, the machine goes to
the Energy Saver mode.
77
Bit Switches - 1
Comments
Comments
D418