Ricoh D065 Service Manual page 1089

Bit Switches - 1
No Function
Threshold memory level for
0-7
parallel memory transmission
No Function
TTI printing position
0: Superimposed on the page
0 data
1: Printed before the data
leading edge
TSI (G3) printing position
0: Superimposed on the page
1 data
1: Printed before the data
leading edge
2 Not used
TTI used for broadcasting
0: The TTIs selected for each
3 Quick/Speed dial are used
1: The same TTI is used for all
destinations
4-7 Not used
No Function
0-7 TTI printing position in the main
D418
System Switch 10 (SP No. 1-101-017)
Threshold = N x 128 KB + 256 KB
N can be between 00 - FF(H)
Default setting: 02(H) = 512 KB
System Switch 11 (SP No. 1-101-018)
Change this bit to 1 if the TTI overprints
information that the customer considers to be
important (G3 transmissions).
Change this bit to 1 if the TSI (G3) overprints
information that the customer considers to be
important.
Do not change the factory settings.
1: The TTI (TTI_1 or TTI_2) which is selected
for all destinations during broadcasting.
Do not change the factory settings.
System Switch 12 (SP No. 1-101-019)
TTI: 08 to 92 (BCD) mm
76
Comments
Comments
Comments
SM