Ricoh D065 Service Manual page 1092

No Function
1: Enabled
Special Original mode
7 0: Disabled
1: Enabled
No Function
0 LS RX memory capacity
to threshold setting
7 00-FF (0-1020 Kbyte: Hex)
System Switch 1B - Not used (do not change these settings)
System Switch 1C - Not used (do not change these settings)
No Function
RTI/CSI/CPS code display
0 0: Enable
1: Disable
1-7 Not used
SM
System Switch 19 (SP No. 1-101-026)
memory expansion option, the scanner page
memory is extended to 12 MB. But the SAF
memory decreases to 18 MB.
1: If the customer frequently wishes to transmit
a form or letterhead which has a colored or
printed background, change this bit to "1".
"Original 1" and "Original 2" can be selected in
addition to the "Text", "Text/Photo" and "Photo"
modes.
System Switch 1A (SP No. 1-101-027)
Sets the value to x4KB. When the amount of
available memory drops below this setting, RX
documents are printed to conserve memory.
Initial setting 0x80 (512 KB)
System Switch 1D (SP No. 1-101-030)
0: RTI, CSI, CPS codes are displayed on the
top line of the LCD panel during
communication.
1: Codes are switched off (no display)
Do not change this setting.
79
Bit Switches - 1
Comments
Comments
Comments
D418