Ricoh D065 Service Manual page 1094

No Function
File No. printing
3 0: Enabled
1: Disabled
Action when authorized
reception is enabled but
authorized RTIs/CSIs are not
4 yet programmed
0: All fax reception is disabled
1: Faxes can be received if the
sender has an RTI or CSI
5-7 Not used
No Function
0 Not used
Report printout after an original
jam during SAF storage or if the
SAF memory fills up
1
0: Enabled
1: Disabled
2 Not used
Received fax print start timing
3
(G3 reception)
SM
System Switch 1E (SP No. 1-101-031)
1: File numbers are not printed on any reports.
If authorized reception is enabled but the user
has stored no acceptable sender RTIs or CSIs,
the machine will not be able to receive any fax
messages.
If the customer wishes to receive messages
from any sender that includes an RTI or CSI,
and to block messages from senders that do
not include an RTI or CSI, change this bit to
"1", then enable Authorized Reception.
Otherwise, keep this bit at "0 (default setting)".
Do not change the settings
System Switch 1F (SP No. 1-101-032)
Do not change the settings.
0: When an original jams, or the SAF memory
overflows during scanning, a report will be
printed.
Change this bit to "1" if the customer does not
want to have a report in these cases.
Memory tx – Memory storage report
Parallel memory tx – Transmission result report
Do not change the settings.
0: The machine prints each page immediately
after the machine receives it.
81
Bit Switches - 1
Comments
Comments
D418