Ricoh D065 Service Manual page 1063

IP-Fax Troubleshooting
Check Point
13 Remote G3 fax turned on?
14 Network bandwidth too narrow?
Cannot send by Alias Fax number.
Check Point
1 LAN cable connected?
2 Number of specified Alias fax correct?
3 Firewall/NAT installed?
4 Transmission sent manually?
5 Gatekeeper installed correctly?
6 Gatekeeper power switched on?
IP address/host name of Gatekeeper
7
correct?
DNS server registered when Gatekeeper
8
host name specified?
9 Enable H.323 SW is set to on?
D418
Check that G3 fax is switched on.
Request the network administrator to
increase the bandwidth.
Raise the network delay level. IPFAX
SW 01 Bit 0 to 3
IP-Fax bandwidth is the same as the
DCS speed. Set IP-Fax SW00 Bit 6 to
1.
Check the LAN cable connection.
Confirm the Alias of the remote fax.
Error Code: 13-14
Cannot breach the firewall. Send by
using another method (Fax, Internet
Fax)
Manual sending not supported.
Contact the network administrator.
Contact the network administrator.
Check the IP address/host name.
Contact the network administrator.
Check the settings.
See User Parameter SW 34 Bit 0
50
Action
Action
SM