Ricoh D065 Service Manual page 1086

No Function
1: Print only when there is a
communication error
Priority given to various types of
remote terminal ID when
printing reports
7 0: RTI > CSI > Dial label > Tel.
number
1: Dial label > Tel. number > RTI
> CSI
No Function
Automatic port selection
0
0: Disabled, 1: Enabled
1-3 Not used
Dialing on the ten-key pad when
the external telephone is
4
off-hook
0: Disabled 1: Enabled
On hook dial
5
0: Disabled 1: Enabled
6-7 Not used
SM
System Switch 09 (SP No. 1-101-010)
protocol dump list only for communications with
errors.
This bit determines which set of priorities the
machine uses when listing remote terminal
names on reports.
Dial Label: The name stored, by the user, for
the Quick/Speed Dial number.
System Switch 0A (SP No. 1-101-011)
When "1" is selected, a suitable port is
automatically selected if the selected port is not
used.
Do not change these settings.
0: Prevents dialing from the ten-key pad while
the external telephone is off-hook. Use this
setting when the external telephone is not by
the machine, or if a wireless telephone is
connected as an external telephone.
1: The user can dial on the machine's ten-key
pad when the handset is off-hook.
0: On hook dial is disabled.
Do not change the factory settings
73
Bit Switches - 1
Comments
Comments
D418