Ricoh D065 Service Manual page 1110

Printer Switch 0B - Not used (do not change the settings)
Printer Switch 0C - Not used (do not change the settings)
Printer Switch 0D - Not used (do not change the settings)
No Function
Paper size selection priority
0 0: Width
1: Length
Paper size selected for printing A4
width fax data
1
0: 8.5" x 11" size
1: A4 size
Page separation
2 0: Enabled
1: Disabled
Printing the sample image on reports
Bit 4 Bit 3
0 0
3-4
0 1
1 0
1 1
SM
Printer Switch 0E (SP No. 1-103-015)
0: A paper size that has the same width
as the received data is selected first.
1: A paper size which has enough length
to print all the received lines without
reduction is selected first.
This switch determines which paper size
is selected for printing A4 width fax data,
when the machine has both A4 and 8.5" x
11" size paper.
1: If all paper sizes in the machine require
page separation to print a received fax
message, the machine does not print the
message (Substitute Reception is used).
After a larger size of paper is set in a
cassette, the machine automatically
prints the fax message.
"Same size" means the sample image is
Setting
printed at 100%, even if page separation
The upper half only
occurs.
User Parameter Switch 19 (13H) bit 4
50% reduction
must be set to "0" to enable this switch.
(sub-scan only)
Refer to Detailed Section Descriptions for
Same size
more on this feature.
Not used
97
Bit Switches - 2
Comments
D418