Ricoh D065 Service Manual page 1105

Bit Switches - 2
No Function
1: Enabled
3-7 Not used
No Function
0-2 Not used
Maximum print width used in the
setup protocol
Bit 4 Bit 3
0
3-4
0
1
1
5-6 Not used
Received message width
restriction in the protocol signal
7 to the sender
0: Disabled
1: Enabled
D418
Printer Switch 00 (SP No. 1-103-001)
1: The machine prints the received and printed
date and time at the bottom of each received
page.
Do not change the settings.
Printer Switch 01 (SP No. 1-103-002)
Setting
0 Not used
1 A3
0 B4
1 A4
Comments
Comments
Do not change the settings.
These bits are only effective when bit 7 of
printer switch 01 is "1".
Do not change the settings.
0: The machine informs the transmitting
machine of the print width depending on the
paper size available from the paper feed
stations.
Refer to the table on the next page for how the
machine chooses the paper width used in the
setup protocol (NSF/DIS).
1: The machine informs the transmitting
machine of the fixed paper width which is
specified by bits 3 and 4 above.
92 SM