Ricoh D065 Service Manual page 1050

Code Meaning
Data Send to SMTP
14-07
Server Failed (4XX)
Data Send to SMTP
14-08
Server Failed (5XX)
Authorization Failed for
14-09
Sending to SMTP Server
14-10 Addresses Exceeded
14-11 Buffer Full
14-12 Data Size Too Large
14-13 Send Cancelled
14-30 MCS File Creation Failed
SM
Suggested Cause/Action
The designated address is not for use with
direct SMTP sending.
Failed to access the SMTP server because the
transmission failed.
PC not operating correctly.
SMTP server operating incorrectly
Network not operating correctly.
Destination folder setting incorrect.
Direct SMTP sending not operating correctly.
Failed to access the SMTP server because the
transmission failed.
SMTP server operating incorrectly
Destination folder setting incorrect.
Direct SMTP sending not operating correctly.
Software application error.
POP-Before-SMTP or SMTP authorization
failed.
Incorrect setting for file transfer
Number of broadcast addresses exceeded the limit
for the SMTP server.
The send buffer is full so the transmission could
not be completed. Buffer is full due to using
Scan-to-Email while the buffer is being used send
mail at the same time.
Transmission was cancelled because the detected
size of the file was too large.
Processing is interrupted because the user
pressed Stop.
Failed to create the MCS file because:
The number of files created with other
37
Error Codes
D418