Ricoh D065 Service Manual page 484

Finisher corner stapler motor error
The stapler motor does not
switch off within the prescribed
740 B
time after operating. The 1st
detection failure issues a jam
error, and the 2nd failure issues
this SC code.
Finisher corner stapler rotation motor error
The stapler does not return to its
home position within the
741 B
specified time after stapling. The
1st detection failure issues a jam
error, and the 2nd failure issues
this SC code.
Finisher stapler movement motor error
The stapler HP sensor is not
activated within the specified
742 B
time after the stapler motor
turned on. The 1st detection
failure issues a jam error, and the
2nd failure issues this SC code.
Booklet stapler motor error 1
The front stapler unit
saddle-stitch motor does not start
743 B
operation within the specified
time. The 1st detection failure
issues a jam error, and the 2nd
failure issues this SC code.
SM Appendix
Service Call Conditions
Staple jam
Number of sheets in the stack
exceeds the limit for stapling
Stapler motor disconnected,
defective
Stapler rotation motor disconnected,
defective
Stapler rotation motor overloaded
due to obstruction
Stapler rotation HP sensor
disconnected, defective
Stapler movement motor
disconnected, defective
Stapler movement motor overloaded
due to obstruction
Stapler HP sensor disconnected,
defective
Front motor disconnected, defective
Front motor overloaded due to
obstruction
3-39 D062/D063/D065/D066