Ricoh D065 Service Manual page 491

Service Call Conditions
Horizontal Transport Motor Error
The motor drive PCB detected an error at the motor.
778-1 D
Top Tray Exit Motor
The motor drive PCB detected an error at the motor.
778-2 D
Top Tray JG Motor
The top tray JG HP sensor did not detect the top tray junction gate at (or
out of) its home position. The 1st occurrence causes a jam, and the 2nd
occurrence causes this SC code.
778-3 D
Entrance JG Motor
The entrance junction gate HP sensor did not detect the entrance
junction gate at (or out of) its home position. The 1st occurrence causes
a jam, and the 2nd occurrence causes this SC code.
778-4 D
D062/D063/D065/D066
Motor harness or connector loose, broken, defective
Motor or motor drive board defective
Motor harness or connector loose, broken, defective
Motor or motor drive board defective
Top tray JG HP sensor dirty
Sensor harness or connector loose, broken, defective
Top tray JG motor harness or connector loose, broken, defective
Sensor defective
Motor or motor drive board defective
Entrance JG HP sensor dirty
Sensor harness or connector loose, broken, defective
Entrance JG motor harness or connector loose, broken, defective
Sensor defective
Motor or motor drive board defective
3-46
Multi Folder (D454)
Multi Folder (D454)
Multi Folder (D454)
Multi Folder (D454)
SM Appendix