Ricoh D065 Service Manual page 1174

0 Priority Select Mode
Select the priority destination according to input mode. The Group button
reflects either email or fax input mode. Released as soon as the entry mode is
selected, regardless of the current entry mode.
1 All Select Mode
Acquires all registered members regardless of entry mode. If both email and
fax are registered, both are selected. The Group button reflects either email or
fax input mode. All registered members are released, regardless of the entry
mode. If both email/fax are registered, both are released.
Bit 1: Not used
Bit 2: Inclusion of the "Add" button when a sequence of Quick/Speed dials is selected
for broadcasting, 0:Not needed, 1: Needed
Bits 3 to 6: Not used
Bit 7: Press "Start" key without an original when using the on hook dial or the external
telephone
0: Displays "Cannot detect original size"
1: Receives fax messages.
6800E2(H) - User parameter switch 18 (SWUSR_12)
Bit 0: TTI date, 0: Off, 1: On
Bit 1: TTI sender, 0: Off, 1: On
Bit 2: TTI file number, 0: Off, 1: On
Bit 3: TTI page number, 0: Off, 1: On
Bit 4 to 7: Not used
6800E3(H) - User parameter switch 19 (SWUSR_13)
Bit 0: Offset sort function for the fax (only using the shift tray on the 1,000 sheet
finisher), 0: Disabled, 1: Enabled
Bit 1: Journal format
0: The Journal is separated into transmissions and receptions
1: The Journal is separated into G3-1, G3-2, and G3-3 communications
Bit 2: Action when the paper cassette that was selected by the specified cassette
selection feature becomes empty.
(This switch is not printed on the user parameter list.)
SM
Service RAM Addresses
161 D418