Communication Switch 0D (SP No. 1-104-014)
No
Function
Communication Switch 0E (SP No. 1-104-015)
No
Function
Minimum interval between
0-7
automatic dialing attempts
Communication Switch 0F – Not used (do not change the settings.)
Communication Switch 10 (SP No. 1-104-017)
No
Function
Memory transmission:
Maximum number of dialing
0-7
attempts to the same
destination
Communication Switch 11 – Not used (do not change the settings.)
Communication Switch 12 (SP No. 1-104-019)
No
Function
Memory transmission: Interval
0-7
between dialing attempts to the
SM
Comments
ringing signals and go into receive mode even if
there is no memory available. This will result in
communication failure.
Comments
06 to FF (Hex), unit = 2 s
(e.g., 06(H) = 12 s)
This value is the minimum time that the machine
waits before it dials the next destination.
Comments
01 – FE (Hex) times
Comments
01 – FF (Hex) minutes
105
Bit Switches - 3
D418