Ricoh D065 Service Manual page 672

[0: Public] [1: Private]
Stamp Data Download
Push [Execute] to download the fixed stamp data from the machine ROM onto
the hard disk. Then these stamps can be used by the system. If this is not done,
5853
the user will not have access to the fixed stamps ("Confidential", "Secret", etc.).
You must always execute this SP after replacing the HDD or after formatting the
HDD. Always switch the machine off and on after executing this SP.
Remote ROM Update
When set to "1" allows reception of firmware data via the local port (IEEE 1284)
during a remote ROM update. This setting is reset to zero after the machine is
5856
cycled off and on. Allows the technician to upgrade the firmware using a parallel
cable.
[0 to 1/1]
0: Not allowed, 1: Allowed
5857 Save Debug Log
On/Off (1:ON 0:OFF)
001
Switches the debug log feature on and off. The debug log cannot be captured
until this feature is switched on.
Target (2: HDD 3: SD)
002 Selects the storage device to save debug logs information when the
conditions set with SP5-858 are satisfied.
[ 2 to 3 / 2 / 1 /step]
Save to HDD
005 Saves the debug log of the input SC number in memory to the HDD.
A unique file name is generated to avoid overwriting existing file names on the
SD Card. Up to 4MB can be copied to an SD Card. 4 MB segments can be
SM Appendix
Service Program Mode Tables
*CTL -
0: OFF, 1: ON
2: HDD, 3: SD Card
4-139 D062/D063/D065/D066