Ricoh D065 Service Manual page 510

Delete All Error 1: HDD
A data error was detected for the HDD/NVRAM after the "Delete All" option
was used.
Note: The source of this error is the Data Overwrite Security Unit running
874 D
from an SD card.
Turn the main switch off/on and try the operation again.
Install the Data Overwrite Security Unit again. For more, see section
"MFP Options" in "Installation".
HDD defective.
Delete All Error 2: Data area
An error occurred while the machine deleted data from the HDD
875 D
Note: The source of this error is the Data Overwrite Security Unit running
from an SD card.
Turn the main switch off/on and try the operation again.
Log data abnormal
An error was detected in the handling
of the log data at power on or during
876 D
machine operation. This can be
caused by switching the machine off
while it is operating.
Data Overwrite Security SD card error
An error occurred, preventing
successful execution of the Data
877 B
Overwrite Security function, even
though it has been set up and
enabled.
SM Appendix
Service Call Conditions
Software error. Update the
firmware
NVRAM defective
HDD defective
DOS card is not inserted completely
into the SD card slot
DOS card has been removed from
the SD card slot.
DOS card is damaged.
Note:
If the SD card has been removed (or
3-65
GW
GW
GW
D062/D063/D065/D066