Ricoh D065 Service Manual page 508

SC card error 1: Confirmation
The machine detects an
electronic license error in the
application on the SD card in
the controller slot immediately
after the machine is turned on.
The program on the SD card
contains electronic confirmation
866 B
license data. If the program
does not contain this license
data, or if the result of the check
shows that the license data in
the program on the SD card is
incorrect, then the checked
program cannot execute and
this SC code is displayed.
SD card error 2: SD card removed
The SD card in the boot slot
867 D
when the machine was turned
on was removed while the
machine was on.
SD card error 3: SC card access
868 D
An error occurred while an SD
card was used.
SM Appendix
Service Call Conditions
Program missing from the SD card
Download the correct program for
the machine to the SD card
Insert the SD card, then turn the
machine off and on.
SD card not inserted correctly
SD card defective
Controller board defective
Note: If you want to try to reformat the
SC card, use SD Formatter Ver 1.1.
3-63 D062/D063/D065/D066