Ricoh D065 Service Manual page 667

Service Program Mode Tables
Not used in this machine.
Fill Addr Acl Info.
This SP must be executed immediately after installation of an HDD unit in a
basic machine that previously had no HDD. The first time the machine is
powered on with the new HDD installed, the system automatically takes the
address book from the NVRAM and writes it onto the new HDD. However, the
new address book on the HDD can be accessed only by the system
administrator at this stage. Executing this SP by the service technician
immediately after power on grants full address book access to all users.
041
Procedure
1. Turn the machine off.
2. Install a new HDD.
3. Turn the machine on.
4. The address book and its initial data are created on the HDD automatically.
5. However, at this point the address book can be accessed by only the
system administrator or key operator.
6. Enter the SP mode and do SP5846-041. After this SP executes
successfully, any user can access the address book.
043 Addr Book Media
047 Initialize Local Addr Book
Initialize Delivery Addr
048
Book
049 Initialize LDAP Addr Book
D062/D063/D065/D066
Displays the slot number where an address
book data is in.
[0 to 30 / - /1]
0: Unconfirmed
1: SD Slot 1
2: SD Slot 2
4: USB Flash ROM
20: HDD
30: Nothing
Clears the local address book information,
including the user code.
Clears the distribution address book
information, except the user code.
Clears the LDAP address book information,
4-134 SM Appendix