Ricoh D065 Service Manual page 1173

Service RAM Addresses
Bit 1: Maximum document length detection
0: Double letter, 1: Longer than double-letter (well log) – up to 1,200 mm
Bit 2: Batch transmission, 0: Off, 1: On
Bit 3: Fax mode settings, such as resolution, before a mode key (Copy, Fax, Printer, or
Scanner) is pressed, 0: Not cleared, 1: Cleared
Bits 4 to 6: Not used
Bit 7: Manual service call (sends the system parameter list to the service station), 0: Off,
1: On
6800DF(H) - User parameter switch 15 (SWUSR_0F)
This switch is not printed on the user parameter list.
Bits 0, 1 and 2: Cassette for fax printout
Bit 2 Bit 1 Bit 0
0 0 1
0 1 0
0 1 1
1 0 0
1 0 1
Other settings: Not used
Bits 3 and 4: Not used
Bit 5: Using the cassette specified by bits 0, 1 and 2 above only, 0: On, 1: Off
Bits 6 and 7: Not used
6800E0(H) – User parameter switch 16 (SWUSR_10)
This switch is not printed on the user parameter list.
Bits 0 and 1: Not used
Bit 2: Paper size selection priority for an A4 size fax message when A4/LT size paper is
not available, 0: A3 has priority, 1: B4 has priority
Bits 3 to 7: Not used
6800E1(H) – User parameter switch 17 (SWUSR_11)
Bit 0: IFAX Group Destination Selection/Release Method
D418
Setting
1st paper feed station
2nd paper feed station
3rd paper feed station
4th paper feed station
LCT
160 SM