Ricoh D065 Service Manual page 361

Hide thumbs Also See for D065:

Table of Contents

Using the Debug Log

Push [#Enter].

The default settings for Keys 1 to 10 are all zero ("0").

Select the number from the table below, then use these key presses to enter the

Moves the cursor to select the digit in the line above.

Enters the number entry mode (displays a "0" at the cursor).

Selects the number to enter at the digit position in the line

Enters the selected number in the line above and exits the

entry mode you can select the next position with

Refer to the table below for the 4-digit numbers to enter for each key. (The acronyms

in parentheses indicate the names of the modules.)

4-Digit Entries for Keys 1 to 10

D062/D063/D065/D066

What It Does

Chapters

Table of Contents