Bit Switches - 3
No
JBIG compression method: Reception
5
0: Only basic supported
1: Basic and optional both supported
JBIG compression method: Transmission
6
0: Basic mode priority
1: Optional mode priority
Closed network (reception)
7
0: Disabled
1: Enabled
D418
Communication Switch 00 (SP No. 1-104-001)
Function
Change the setting when
communication problems occur
using JBIG compression.
Change the setting when
communication problems occur
using JBIG compression.
1: Reception will not go ahead if the
polling ID code of the remote
terminal does not match the polling
ID code of the local terminal. This
function is only available in
NSF/NSS mode.
100
Comments
SM