Ricoh D065 Service Manual page 1117

Bit Switches - 3
No Function
Point of resumption of memory
transmission upon redialing
0
0: From the error page
1: From page 1
1-7 Not used
No Function
Not used
0-3
Printout of the message when
4 acting as a Transfer Station
0: Disabled, 1: Enabled
5-7 Not used
Communication Switch 0C - Not used (do not change the settings)
No Function
The available memory
threshold, below which ringing
detection (and therefore
0-7
reception into memory) is
disabled
D418
Communication Switch 0A (SP No. 1-104-011)
Communication Switch 0B (SP No. 1-104-012)
Communication Switch 0D (SP No. 1-104-014)
00 to FF (Hex), unit = 4 kbytes
(e.g., 06(H) = 24 kbytes)
One page is about 24 kbytes.
The machine refers to this setting before each fax
reception. If the amount of remaining memory is
below this threshold, the machine cannot receive
any fax messages.
If this setting is kept at 0, the machine will detect
Comments
0: The transmission begins from the page
where transmission failed the previous time.
1: Transmission begins from the first page,
using normal memory transmission.
Do not change the settings.
Comments
Do not change the settings.
When the machine is acting as a Transfer
Station, this bit determines whether the
machine prints the fax message coming in
from the Requesting Terminal.
Do not change the settings.
Comments
104 SM