Ricoh D065 Service Manual page 1091

Bit Switches - 1
No Function
0 1
1 0
1 1
6-7 Not used
No Function
Parallel Broadcasting
0 0: Disabled
1: Enabled
Priority setting for the G3 line.
1 0: PSTN-1 > PSTN-2 or 3
1: PSTN-2 or 3 > PSTN-1
2-7 Not used
System Switch 17 - Not used (do not change these settings)
System Switch 18 - Not used (do not change these settings)
No Function
0-5 Not used
Extended scanner page
memory after memory option is
6
installed
0: Disabled
D418
System Switch 15 (SP No. 1-101-022)
30 min
1 hour
24 hours
Do not change
System Switch 16 (SP No. 1-101-023)
1: The machine sends messages
simultaneously using all available ports during
broadcasting.
This function allows the user to select the
default G3 line type. The optional SG3 units are
required to use the PSTN-2 or 3 setting.
Do not change these settings.
System Switch 19 (SP No. 1-101-026)
Do not change the settings.
0: After installing the memory expansion option,
the scanner page memory is extended to 4 MB
from 2 MB.
1: If this bit is set to 1 after installing the
Comments
Comments
Comments
78 SM