Ricoh D065 Service Manual page 1102

No Function
transmissions broadcasted using SMTP protocol are recorded in the Journal.
For example:
"1st destination + Total number of destinations: 9" in the Journal indicates a
broadcast to 9 destinations.
0: Not recorded
1: Recorded
Determines whether the I-fax automatically redials when an error occurs.
1 0: OFF
1: ON
2-7 Not Used
I-fax Switch 06 - Not used (do not change the settings)
I-fax Switch 07 - Not used (do not change the settings)
No Function
Memory Threshold for POP Mail Reception
This setting determines the amount of SAF (Store and Forward) memory. (SAF
stores fax messages to send later for transmission to more than one location, and
also holds incoming messages if they cannot be printed.) When the amount of
0-7
SAF memory available falls below this setting, mail can no longer be received;
received mail is then stored on the mail server.
00-FF (0 to 1024 KB: HEX)
The hexadecimal number you enter is multiplied by 4 KB to determine the amount
of memory.
SM
I-fax Switch 05 (SP No. 1-102-006)
I-fax Switch 08 (SP No. 1-102-009)
89
Bit Switches - 2
Comments
Comments
D418