Calibrating The Color - Christie CP2415-Xe Installation And Setup Manual

6. Equally turn the set screw (C) and cap screw (D) in opposite directions until the black corner is
removed.
7. Replace the top cover.

Calibrating the color

Use Measured Color Gamut Data (MCGD) files to correct on-screen colors.
1. Using a colorimeter, measure the colors displayed on the screen from the center of the
audience viewing location to determine the Measured Color Gamut Data (MCGD) value.
2. In the left navigation menu, select Color Settings > MCGD File Setup and enter the color
values in the x and y fields for the different colors.
3. Select Save.
4. Update the relevant channel settings to use the MCGD file created.
5. Select the TCGD file suitable for the content played while the channel is active.
CP2415-Xe Installation and Setup Guide
020-103584-02 Rev. 1 (09-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Adjusting the image
45