Calibrating The Color - Christie CP2420-Xe Installation And Setup Manual

by the integrator edges form an even perimeter around the full active display area without interfering
with the image and all of the image is displayed.
1. To raise or lower the image, adjust the screw closest to the right side on the base of the
projector.
2. To move the image left or right, adjust the screw farthest from the right side.

Calibrating the color

Use Measured Color Gamut Data (MCGD) files to correct on-screen colors.
1. Using a colorimeter, measure the colors displayed on the screen from the center of the
audience viewing location to determine the Measured Color Gamut Data (MCGD) value.
2. In the left navigation menu, select Color Settings > MCGD File Setup and enter the color
values in the x and y fields for the different colors.
3. Select Save.
4. Update the relevant channel settings to use the MCGD file created.
5. Select the TCGD file suitable for the content played while the channel is active.
CP2420-Xe and CP4420-Xe Installation and Setup Guide
020-103555-01 Rev. 1 (03-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
Adjusting the image
47