Field Description - Polycom RealPresence RMX 1500 Administrator's Manual

IP Network Service - IP Parameters
Field
Network Service Name
IP Network Type
Signaling Host IP
Address
Media Card 1 Port 1 IP
Address
Media Card 1 Port 2 IP
Address 2
Polycom®, Inc.
Description
Enter the IP Network Service name.
Note: This field is displayed in all IP Signaling dialog boxes and can contain
character sets that use Unicode encoding.
Select the IP Network environment. You can select:
• H.323 - For an H.323-only Network Service.
• SIP - For a SIP-only Network Service.
• H.323 & SIP - For an integrated IP Service. Both H.323 and SIP participants
can connect to the Collaboration Server using this service.
Note: This field is displayed in all Default IP Service tabs.
Enter the address to be used by IP endpoints when dialing into the
Collaboration Server using this Network Service.
Dial out calls of participants to whom this network service will be assigned are
initiated from this address.
This address is used to register the Collaboration Server with a Gatekeeper or a
SIP Proxy server residing on this network.
If only one network is connected to this media card, it is enough to assign one
media card to this Network Service. In such a case, enter one IP address for the
media card according to the LAN Port used for the connection.
If each of the LAN ports on one media card is used with two different networks,
each port is assigned to its own Network Service. In such a case, enter the IP
address of the port to be assigned to this Network Service.
A LAN port that is already assigned to a different Network Service, displays the
IP Address of the assigned port and it cannot be assigned to this Network
Service (it is disabled).
Network Security
548