Polycom RealPresence RMX 1500 Administrator's Manual page 825

Manually Added, Modified, Deleted System Flags
Flag
PASSWORD_FAILURE_LIMIT
PCM_FECC
PCM_LANGUAGE
PORT_GAUGE_ALARM
PRESERVE_ICE_CHANNEL_IN_C
ASE_OF_LOCAL_MODE
PRESERVE_PARTY_CELL_ON_F
ORCE_LAYOUT
Polycom®, Inc.
Description
The number of unsuccessful Logins permitted in Ultra Secure Mode.
Default: 3
Determines whether the DTMF Code, ##, the Far/Arrow Keys (FECC) or
both will activate the PCM interface. This flag can be also be used in
combination with DTMF code definitions to disable PCM.
Possible Values: YES / NO
Default: YES.
Determines the language of the PCM interface.
Possible Values are: ENGLISH, CHINESE_SIMPLIFIED,
CHINESE_TRADITIONAL, JAPANESE, GERMAN, FRENCH, SPANISH,
KOREAN, PORTUGUESE, ITALIAN, RUSSIAN, NORWEGIAN
Default: Current Collaboration Server Web Client language.
When set to YES, if system resource usage reaches the High Port Usage
Threshold as defined for the Port Gauges, System Alerts in the form of an
Active Alarm and an SNMP trap are generated.
When set to NO (default), local the ICE channel is closed after applying
CAC bandwidth management when Call Admission Control is enabled in
the local network.
When set to YES, the ICE channel is preserved open throughout the call.
Default: NO
Used to prevent reassignment of cells in a forced layout that were assigned
to endpoints that have disconnected, paused their video, or have been
removed from the conference. The cell will remain black until the endpoint
reconnects or a new layout is used, or the conference ends.
Range: YES / NO
Default: NO
• NO - Cells of dropped endpoints are reassigned. Endpoints that
reconnect will be treated as new endpoints.
• YES - Cells of dropped endpoints are not reassigned, but will be
reserved until the endpoint reconnects.
Forced Layout Guidelines:
• It is recommended that this flag be set to YES if the Collaboration Server
is used primarily for ITP conferences with MLA.
• When a new forced layout is sent to the MCU, the MCU no longer
preserves the cells for disconnected participants. The layout is redrawn
using the currently connected participants only.
• If the dropped endpoint was forced to use a particular cell, and that cell
is switched from forced layout to automatically assigned, the MCU no
longer preserves the cell. Any other endpoint can be assigned that
particular cell.
• This feature works the same way in Telepresence conferences, even
where the layouts are controlled by MLA.
System Configuration Flags
794