System Flags Affected By Ultra Secure Mode - Polycom RealPresence RMX 1500 Administrator's Manual

To modify the ULTRA_SECURE_MODE System flag value:
1 On the Collaboration Server menu, click Setup > System Configuration.
The System Flags dialog box opens.
2 Double-click or select the ULTRA_SECURE_MODE flag and click the Edit Flag button.
3 In the New Value field, enter the flag's new value - YES or NO.
4 Click OK to close the Update Flag dialog box.
5 Click OK to close the System Flags dialog box.
For flag changes (including deletion) to take effect, reset the MCU. For more information see
Resetting the Collaboration

System Flags affected by Ultra Secure Mode

When the ULTRA_SECURE_MODE flag is set to YES the default and range values of the following flags
are affected.
Polycom®, Inc.
Server.
Ultra Secure Mode
816