Polycom RealPresence RMX 1500 Administrator's Manual page 608

Conference IVR Service Properties - General Voice Messages
Message Type
Blip on Cascade Link
Chairperson Exit
Chairperson Help Menu
Change Chairperson
Password
Change Conference
Password
Change Password
Failure
Change Passwords
Menu
Conference is Locked
Conference is Secured
Conference is unsecured
Confirm Password
Change
Dial Tone
Disconnect on Busy
Polycom®, Inc.
Description
Indicates that the link to the cascaded conference connected successfully.
Informs all the conference participants that the chairperson has left the
conference, causing the conference to automatically terminate after a short
interval.
Note: This message is played only when the Requires Chairperson option is
selected in the Conference Profile - IVR dialog box.
A voice menu is played upon a request from the chairperson, listing the
operations and their respective DTMF codes that can be performed by the
chairperson. The playback can be stopped any time.
Note: If you modify the default DTMF codes used to perform various operations,
the default voice files for the help menus must be replaced.
Requests the participant to enter a new chairperson password when the
participant is attempting to modify the chairperson password.
Requests the participant to enter a new conference password when the
participant is attempting to modify the conference password.
A message played when the participant enters an invalid password, for example
when a password is already in use.
This voice menu is played when the participants requests to change the
conference password. This message details the steps required to complete the
procedure.
This message is played to participants attempting to join a Secured conference.
This message is played when the conference status changes to Secure as
initiated by the conference chairperson or participant (using DTMF code *71).
This message is played when the conference status changes to Unsecured as
initiated by the conference chairperson or participant (using DTMF code #71).
Requests the participant to re-enter the new password.
The tone that will be played to indicate a dialing tone, to let the calling participant
enter the destination number.
Note: This option is not available in SVC conferences and for SVC participants
in mixed CP and SVC conferences.
The Busy Tone is played when the system retries to redial a busy destination
number and fails after exceeding the number of redials. This call is then
disconnected.
Note: This option is not available in SVC conferences and for SVC participants
in mixed CP and SVC conferences.
IVR Services
577