Polycom RealPresence RMX 1500 Administrator's Manual page 442

Conference Properties - Advanced Parameters
Field/Option
Packet Loss
Compensation (LPR and
DBA)
Auto Terminate
Auto Redialing
Exclusive Content Mode
Enable FECC
FW NAT Keep Alive
TIP Compatibility
MS AV MCU cascade
mode
4 Click the Gathering Settings tab.
The Conference Properties - Gathering Settings dialog box opens.
Polycom®, Inc.
Description
Indicates wether Packet Loss Compensation (LPR and DBA) is enabled for the
conference.
When selected, indicates that the MCU will automatically terminate the
conference when Before First Joins, At the End-After Last Quits and At the
End - When Last Participant Remains parameters apply.
Indicates whether dial-out participants are automatically (when selected) or
manually (when cleared) connected to the conference.
This option is disabled in mixed CP and SVC conferences.
When selected, Content is limited to one participant.
When selected, Far End Camera Control is enabled.
When selected, sends a FW NAT Keep Alive message at specific Intervals for
the RTP, UDP and BFCP channels. The interval specifies how often a FW NAT
Keep Alive message is sent. For more information, see
Collaboration Server (RMX) Network Port
Indicates the TIP Compatibility mode implemented for the conference, when
the environment implements the Collaboration Server and Cisco Telepresence
Systems (CTS) Integration solution.
• None
• Prefer TIP
For more information, see .
This field is part of the Microsoft Lync utility and defines the resource usage in
the cascading relationship between Polycom RealPresence Collaboration
Server and Microsoft Lync server.
Microsoft Lync is not supported by Collaboration Server (RMX) 18000-0.
For more information see
AVMCU Cascade.
Conference and Participant Monitoring
Usage.
Video Resource Requirement Selection in Lync 2013
RealPresence
411