Polycom RealPresence RMX 1500 Administrator's Manual page 513

Collaboration server

Hide thumbs Also See for RealPresence RMX 1500:

Table of Contents

5 Modify the following fields:

Default Management Network Service – Routers

Default Router IP

Static Routes

(IPv4 Only Table)

Polycom, Inc.

Enter the IP address of the default router. The default router

is used whenever the defined static routers are not able to

route packets to their destination. The default router is also

used when host access is restricted to one default router.

The system uses Static Routes to search other networks

for endpoint addresses that are not found on the local LAN.

Up to five routers can be defined in addition to the Default

Router. The order in which the routers appear in the list

determines the order in which the system looks for the

endpoints on the various networks. If the address is in the

local subnet, no router is used.

To define a static route (starting with the first), click the

appropriate column and enter the required value.

Enter the IP address of the router.

Enter the IP address of the entity to be reached outside the

local network. The Remote Type determines whether this

entity is a specific component (Host) or a network.

If Host is selected in the Remote Type field, enter the IP

address of the endpoint.

If Network is selected in the Remote Type field, enter of

the segment of the other network.

Remote Subnet

Enter the subnet mask of the remote network.

Select the type of router connection:

Network – defines a connection to a router segment in

another network.

Host – defines a direct connection to an endpoint found

on another network.

IP Network Services

Troubleshooting