Polycom RealPresence RMX 1500 Administrator's Manual page 800

MCMS_PARAMETERS_USER Flags
Flag
IVR_MESSAGE_VOLUME
IVR_MUSIC_VOLUME
IVR_ROLL_CALL_VOLUME
LAST_LOGIN_ATTEMPTS
LEGACY_EP_CONTENT_DEFAULT
_LAYOUT
MAX_CONF_PASSWORD_REPEAT
ED_DIGITS
Polycom®, Inc.
Description
The volume of IVR messages varies according to the value of this flag.
Possible value range: 0-10 (Default: 6).
0 – disables playing the IVR messages
1 – lowest volume
10 – highest volume
Notes:
• It is not recommended to disable IVR messages by setting the flag value
to 0.
• System reset is not required for flag changes to take effect.
The volume of the IVR music played when a single participant is connected
to the conference varies according to the value of this flag.
Possible value range: 0-10 (Default: 5).
0 – disables playing the music
1 – lowest volume
10 – highest volume
Note: System reset is not required for flag changes to take effect.
The volume of the Roll Call varies according to the value of this flag.
Possible value range: 0-10 (Default: 6).
0 – disables playing the Roll Call
1 – lowest volume
10 – highest volume
Note:
• It is not recommended to disable the Roll Call by setting the flag value
to 0.
• System reset is not required for flag changes to take effect.
If YES, the system displays a record of the last Login of the user.
Default: NO.
For more details, see User Login
Defines the video layout to be displayed on the screen of the legacy
endpoints when switching to Content mode.
Default value: CP_LAYOUT_1P7 (1+7).
For a detailed list of possible flag values for the various video layouts, see
Legacy Endpoint Content Default Layout Flag
Allows the administrator to configure the maximum number of consecutive
repeating characters that are to be allowed in a conference password.
Range: 1 - 4
Default: 2
System Configuration Flags
Record.
Values.
769