Polycom RealPresence RMX 1500 Administrator's Manual page 804

MCMS_PARAMETERS_USER Flags
Flag
NUMERIC_CONF_ID_MAX_LEN
NUMERIC_CONF_ID_MIN_LEN
NUMERIC_CONF_PASS_DEFAULT
_LEN
NUMERIC_CONF_PASS_MAX_LE
N
NUMERIC_CONF_PASS_MIN_LEN
Polycom®, Inc.
Description
The maximum number of digits that the user can enter when manually
assigning an ID to a conference.
Range: 2-16 (Default: 8)
Note: Selecting 2 limits the number of simultaneous ongoing conferences
to 99.
The minimum number of digits that the user must enter when manually
assigning an ID to a conference.
Range: 2-16 (Default: 4)
Note: Selecting 2 limits the number of simultaneous ongoing conferences
to 99.
This flag enables or disables the automatic generation of conference
passwords and determines the number of digits in the conference
passwords assigned by the MCU.
Possible values are:
• 0 disables the automatic password generation in both Standard Security
Mode or Ultra Secure Mode.
Any value other than 0 enables the automatic generation of conference
passwords if the flag HIDE_CONFERENCE_PASSWORD is set to NO.
• 1 – 16, default: 6 (Standard Security Mode)
• 9 – 16, default: 9 (Ultra Secure Mode).
If the default is used, in non-secured mode the system will automatically
generate conference passwords that contain 6 characters.
The maximum number of digits that the user can enter when manually
assigning a password to the conference.
Range:
• 0 – 16 (Standard Security Mode)
• 9 – 16 (Ultra Secure Mode).
Default (both Modes): 16
Defines the minimum length required for the Conference password.
Value: 0-16
Default:
• 0 - (Standard Security Mode) this rule is not enforced. However this rules
cannot be disabled when the Collaboration Server is in Ultra Secure
Mode.
• 9 - (Ultra Secure Mode) Conference password must be at least 9
characters in length (default).
System Configuration Flags
773