Enabling As-Sip Content - Polycom RealPresence RMX 1500 Administrator's Manual

Collaboration server

Hide thumbs Also See for RealPresence RMX 1500:

Table of Contents

● Once Content has been initiated by one of the endpoints, the Content channel will be opened to all

endpoints and remain open even if the Content sharing endpoint stops sharing Content.

Enabling AS-SIP Content

AS-SIP Content is enabled in the New Profile / Profile Properties - Video Quality tab.

When the AS-SIP Content check box is selected the following are automatically enabled and cannot be

● Send Content to Legacy Endpoints

● Multiple Resolutions

The time that the RMX waits for endpoints to respond to its SDP Re-invite is determined by a timer. The

timer duration, in seconds, is controlled by the AS_SIP_CONTENT_TIMER System Flag. Its default value

is 10 seconds. To modify the timer value, manually add this flag to system.cfg and modifying its value as

Range: 1 - 60 seconds. (Values outside this range are rejected and an error message is displayed.)

Polycom®, Inc.

Ultra Secure Mode