Polycom RealPresence RMX 1500 Administrator's Manual page 811

Collaboration server
Hide thumbs Also See for RealPresence RMX 1500:
Table of Contents

Advertisement

Manually Added, Modified, Deleted System Flags
Flag
CASCADE_LINK_PLAY_TONE_ON
_CONNECTION
CELL_IND_LOCATION
CFG_KEY_ENABLE_FLOW_CONT
ROL_REINVITE
CONF_GATHERING_DURATION_S
ECONDS
CP_REGARD_TO_INCOMING_SE
TUP_RATE
CPU_BONDING_LINK_MONITORI
NG_FREQUENCY
Polycom®, Inc.
Description
When set to YES, the RealPresence Collaboration Server plays a tone
when a cascading link between conferences is established. The tone is
played in both conferences.
This tone is not played when the cascading link disconnects from the
conferences.
The tone used to notify that the cascading link connection has been
established cannot be customized.
Default value: NO.
The tone volume is controlled by the same flag as the IVR messages and
tones: IVR_MESSAGE_VOLUME.
Change the location of the display of Network Quality Indicators displayed
in the cells of the conference Video Layout.
Default: TOP_RIGHT
Range:
BOTTOM_LEFT
BOTTOM_RIGHT
TOP_LEFT
TOP_RIGHT
Used to enable or disable sending a re-INVITE to endpoints to adjust their
data rate. When set to YES, re-INVITE is used for endpoints that do not
support flow control in SIP using either the Information or RTCP Feedback
mechanisms.
Default: NO.
The value of this System Flag sets the duration of the Gathering Phase in
seconds. The Gathering Phase duration of the conference is measured
from the scheduled start time of the conference.
Range: 0 - 3600
Default: 180
For more information see
For use in the Avaya Environment.
If set to YES, the RealPresence Collaboration Server calculates the line
rate for incoming calls in CP conferences, according to the line rate which is
declared by the endpoint in the H.225 setup message.
If set to NO, the rate is calculated according to the conference line rate
regardless of the rate in the H.225 setup message.
Default: YES.
Used when using the MII Monitor for troubleshooting networks.This flag
sets the MII Polling Interval in milliseconds. A value of zero disables MII
monitoring.
Default: 100
System Configuration Flags
Video Preview (AVC Participants Only)
780

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RealPresence RMX 1500 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Table of Contents