Polycom RealPresence RMX 1500 Administrator's Manual page 757

10 Define the following parameters:
SNMPv3 - Traps
Field
SNMP Trap Version
Trap Destination
Polycom®, Inc.
Description
Specifies the version, either Version 1 2 or 3 of the traps being sent to the IP
Host. Polycom software supports the standard SNMP version 1 and 2 traps,
which are taken from RFC 1215, convention for defining traps for use with
SNMP.
Note: The SNMP Trap Version parameters must be defined identically in the
external SNMP application.
This box lists the currently defined IP addresses of the Manager terminals to
which the message (trap) is sent.
IP Enter the IP address of the SNMP trap
recipient.
Community Name Enter the Community Name of the
manager terminal used to monitor the
MCU activity
User Name Enter the name of the user who is to have
access to the trap.
Authentication Enter the authentication protocol: MD5 or
Protocol SHA.
Privacy Protocol Enter the privacy protocol: DES or AES.
Engine ID Enter an Engine ID to be used for both
the Agent and the Trap.
Default: Empty
Administration and Utilities
All Versions
Version 1
and Version
2
Version 3
726