Legacy_Ep_Content_Default_Layout Flag - Polycom RealPresence RMX 1500 Administrator's Manual

Example:
The following table illustrates the effect of modifying the PREDEFINED_AUTO_LAYOUT_5 flag in
conferences with fewer or more participants than the number of windows selected in the default layout.
Example of Predefined Auto Layouts
Flag
PREDEFINED
_AUTO_LAYOUT_5
Default =

LEGACY_EP_CONTENT_DEFAULT_LAYOUT Flag

The following table lists the value for each video layout that can be defined for the
LEGACY_EP_CONTENT_DEFAULT_LAYOUT Flag. It allows the selection of video layout that will be
displayed on the screen of the legacy endpoint when switching to Content mode.
For a list of available layouts see
CS_ENABLE_EPC Flag
Endpoints that support People+Content may require a different signaling (for example, FX endpoints). For
these endpoints, manually add the flag CS_ENABLE_EPC with the value YES (default value is NO) to the
CS_MODULE_PARAMETERS tab.
Polycom®, Inc.
Set to Number of
Possible Value Participants
3
CP_LAYOUT_1
x2VER
7
CP_LAYOUT_I 3
P5
7
Available Layouts.
System Configuration Flags
Participant's View
Voice activated switching displays the current
speaker in the left window of the video layout and
only the two last speakers are displayed.
Voice activated switching displays the current
speaker in the large (top left) window of the video
layout.
Voice activated switching displays the current
speaker in the top left window of the video layout.
808