Enabling And Configuring 802.1X Authentication - Polycom RealPresence RMX 1500 Administrator's Manual

Enabling and Configuring 802.1X Authentication

802.1X Authentication for each NIC is enabled or disabled in the Setup > Ethernet Settings dialog box.
The following additional table columns are used to modify these parameters:
● 802.1X Authentication
● User Name
● Password
Modify the Ethernet Settings table fields as set out below:
802.1X Authentication - Configuration
Field
802.1x Authentication
User Name
Password
(EAP-MD5, PEAPv0 and
MSCHAPv2 only)
Polycom®, Inc.
Description
For each NIC, click the arrow to open the drop-down menu and select (or
disable) the 802.1X Authentication method:
• Off
• EAP-MD5
• EAP-TLS
• PEAPv0
• MSCHAPv2
Enter the User name that the RMX will use to register with the 802.1X
Authentication Server. This must be the RMX's DNS name and can be up to
256 characters.
Note: If the Domain Name (DC) field was completed in the Certificate Request,
the User must be: <Common Name (DNS)>@<Domain Name (DC)> as set
out in the Certificate Request.
Enter the Password, that the RMX will use to register with the 802.1X
Authentication Server. Up to 256 Unicode characters can be used.
The Password is always displayed as four asterisks.
Ultra Secure Mode
863