Connection To The Entry Queue - Polycom RealPresence RMX 1500 Administrator's Manual

Connection to the Entry Queue

An undefined participant connecting to an Entry Queue inherits the encryption characteristics of the Entry
Queue as defined in the Entry Queue's profile.
Participants can be moved from the Entry Queue and the destination conference if both conferencing
entities have the same Profile settings, i.e. from SVC Only Entry Queue to SVC Only conference and from
mixed CP and SVC Entry Queue to a mixed CP and SVC conference, etc.
The following table summarizes the connection possibilities for a participant that is to be moved from an
Entry Queue to a destination conference for each of the conference Profile and Entry Queue encryption
options.
Connection of Undefined Participants to the Entry Queue Based on Encryption Settings
Entry Queue Encryption
Setting
No Encryption
Encrypt All
Encrypt When Possible
* Flag = FORCE_ENCRYPTION_FOR_UNDEFINED_PARTICIPANT_IN_WHEN_AVAILABLE_MODE
Moving from the Entry Queue to Conferences or Between Conferences
Participants can be moved from the Entry Queue and the destination conference if both conferencing
entities have the same Profile settings, i.e. from SVC Only Entry Queue to SVC Only conference and from
mixed CP and SVC Entry Queue to a mixed CP and SVC conference, etc.
When moving participants from the Entry Queue to the destination conference, or when the Collaboration
Server user moves AVC participants from one conference to another (SVC participants cannot be moved
between conferences), the connection rules are similar and they are summarized in the table below:
Moving participants from entry queue to conference / between conferences depending on encryption settings
Destination
Conference
Encryption Setting
No Encryption
Polycom®, Inc.
Undefined Participant Connection to the Entry Queue
*Flag = No
Connected, non-encrypted
(Encryption is not declared by the
Collaboration Server, therefore endpoint
does not use encryption)
Connected only if encrypted.
Non-encrypted endpoints are
disconnected
Connected encrypted - Endpoints with
encryption capabilities.
Connected non-encrypted - endpoints
without encryption capabilities
Current Participant Encryption Status
Encrypted
*Flag = NO
Move succeeds, connected encrypted
Implementing Media Encryption for Secured Conferencing
*Flag = YES
Connected, non-encrypted
(Encryption is not declared by the
Collaboration Server, therefore endpoint
does not use encryption)
Connected only if encrypted.
Non-encrypted endpoints are
disconnected
Connected only if encrypted.
Non-encrypted endpoints are
disconnected.
*Flag = YES *Flag = NO
Move succeeds, connected
non-encrypted
Non-Encrypted
*Flag = YES
158