Polycom RealPresence RMX 1500 Administrator's Manual page 797

MCMS_PARAMETERS_USER Flags
Flag
FORCE_SYSTEM_BROADCAST_V
OLUME
FORCE_SYSTEM_LISTENING_VO
LUME
GK_MANDATORY_FOR_CALLS_IN
GK_MANDATORY_FOR_CALLS_O
UT
H263_ANNEX_T
HD_THRESHOLD_BITRATE
HW_FOLLOW_SPEAKER_RESOL
UTION_ON_1X1_LAYOUT
INTERNAL_SCHEDULER
ISDN_COUNTRY_ CODE
ISDN_IDLE_CODE_E1
ISDN_IDLE_CODE_T1
ISDN_NUM_OF DIGITS
Polycom®, Inc.
Description
If set to YES, the level of broadcasting volume of the connected participant
is value taken from the system flag SYSTEM_BROADCAST_VOLUME.
If set to NO (default), the broadcasting volume level is 5.
If set to YES, the level of listening volume of the connected participant is
value taken from the system flag SYSTEM_LISTENING_VOLUME.
If set to NO (default), the listening volume level is 5.
If set to YES, a gatekeeper is required to receive incoming H.323 calls. If a
gatekeeper is not configure in the Collaboration Server, the calls will fail.
If set to NO (default), gatekeeper is not required to process H.323 incoming
calls and H.323 participants can dial in with or without a gatekeeper.
If set to YES, a gatekeeper is required to perform H.323 outgoing calls. If a
gatekeeper is not configure on the Collaboration Server, the calls will fail.
If set to NO (default), gatekeeper is not required to dial out to H.323
participants and calls can be dialed out with or without a gatekeeper.
Set to NO to send the content stream without Annex T and enable Aethra
and Tandberg endpoints, that do not support Annex T, to process the
content.
Default: YES
Sets the minimum bit rate required by endpoints to connect to an HD
Conference. Endpoints that cannot support this bit rate are connected as
audio only.
Range: 384kbps - 4Mbs (Default: 768)
Enables endpoints capable of higher resolution In a conference where
some endpoints are lower than 4CIF and others are higher to receive the
Indication icons.
When set to NO (default) this flag prevents potential scheduling conflicts
from occurring as a result of system calls from external scheduling
applications such as Polycom ReadiManager®, and others via the API.
Set to YES to schedule conference reservations using an external
scheduling application.
The name of the country in which the MCU is located.
Default: COUNTRY_NIL
The Idle code (silent), transmitted on the ISDN E1 B channels, when there
is no transmission on the channels.
Default: 0x54
The Idle code (silent), transmitted on the ISDN T1 B channels, when there
is no transmission on the channels.
Default: 0x13
When using ISDN Overlap sending dialing mode, this field holds the
number of digits to be received by the MCU.
Default: 9
System Configuration Flags
766