Installing Rmx Manager In Secure Communication Mode - Polycom RealPresence RMX 1500 Administrator's Manual

Installing RMX Manager in Secure Communication
Mode
The RMX Manager cannot be downloaded from an MCU operating in Secure Communication Mode, without
a valid TLS certificate.
The following procedure describes how to obtain a TLS certificate and download the RMX Manager from
the MCU operating in Secure Communication Mode.
FIPS is always enabled in Ultra Secure Mode, and when ClickOnce is used to install RMX Manager,
the workstation must have one of the following installed:
• .NET Framework 3.5 or a later version of the .NET Framework.
• .NET Framework 2.0 plus Service Pack 1 or later.
To install the RMX Manager:
1 Set the Collaboration Server to Non Secure Communication Mode
a In the RMX Management pane, click IP Network Services.
b In the IP Network Services list pane, double click the Management Network entry.
The Management Network Properties dialog box is displayed.
Polycom®, Inc.
RMX Manager Application
670